you don't need it Guys ;
just tie a sting around the chain , the wood block was to keep the tensioner
in on the L motor, no need on the u20 because the tensoner is on the head!
Mike Kerr
Roadster Restoration
3730 Todrob LN.
Placerville CA. 95667
Ph.# 530-644-6777
Fax# 530-644-7252
E-mail: mikekerr@innercite.com
Web page : http://www.innercite.com/~wolfgang
Visa & master card
-----Original Message-----
From: Mike Poorboy <bitterrootprop@nidlink.com>
To: datsun-roadsters@autox.team.net <datsun-roadsters@autox.team.net>
Date: Tuesday, November 16, 1999 9:14 PM
Subject: Re: U-20 cam sprocket chock
>List,
>Will the L series tool that Snap On, Matco and Mac sell work. I have also
seen
>a long screwdriver used.
>
>Mike
>Hayden Lake, Idaho
>
>bill/liz wessel wrote:
>
>> Guys,
>>
>> Got a "customer" with a 2000 head that needs to come off. The "evil L" is
>> gone. No way to hold up the sprocket and chain from falling to the bottom
>> of the pan.
>>
>> Can someone provide the dimensions of the wood tool (don't laugh, this
had
>> an actual Nissan number, it was a factory tool) that is used to chock the
>> chain and prevent it from falling while you remove the head?
>>
>> Thanks in advance.
>>
>> Bill Wessel
>> Madison, WI
>> '68 1600, '69 2000,
>> and GP race roadsters
>
|