----------
From: William Hatfield[SMTP:jhatfield@cavemen.net]
Sent: Sunday, July 18, 1999 12:40 PM
To: Daniel Neuman; Datsun Roadsters - Post List
Subject: Re: MSD install help
2. I think you want to use the magnetic trigger wires. I'm not real familiar
with the Petronics unit so read the really good instructions that came with the
MSD
unit to be sure.
NO! You use the point connections. The Pertronix pulls the MSD trigger to
ground
just like a set of points does! The red Pertronix and the MSD power wire goes
to ignition ON.
The Pertronix Black goes to the MSD points trigger wire.
Connect the coil to the MSD wires as shown in the MSD directions.
Jim Tyler
|