Teddy
Hello from San Diego 70's (Burr) and clear
8.8 are only SAE grade 5 bolts.
!!!!!! Use 10.9 bolts or SAE grade 8 for suspension !!!!!!!
I have seen that done on race cars to get full back caster with 2° camber.
I would use one regular and one lock nut on each bolt.
Phil
'69 solex 2000
Teddy Seidenfeld wrote:
> Hello all from Pittsburgh (temp in the 50's and no sun today)
>
> I'm prepared to install two new (8.8 strength 10mm x 50mm) bolts to
> replace the one that broke and the one that I don't want to worry about
> following suit.
>
> Thanks,
> Teddy
> 69 2000
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
|