What is the address of your web site?
----- Original Message -----
From: "Corky" <corky@zaks.com>
To: "V8 List" <buick-rover-v8@autox.team.net>
Sent: Wednesday, July 18, 2001 2:14 PM
Subject: A couple questions...
> Hi - I received this through my website - I'm not sure of the asnwers, can
> anyone help and I'll pass it along (I'm also sending him the address of
this
> group, but wanted to get things going for him).
>
> Here goes:
> Are the camshaft journals/camshaft engine block bearings the same
> inside/outside diameter? In other words, will the bearings fit both the
> Buick as well as the Rover block?
>
> I am considering installing a 1/4 inch oil line running from the oil
> pump blank plug, to the camshaft/distributor gear, to give considerably
more
> lubrication to those gears in use. Since this engine oil system is based
on
> volumn rather than on pressure, will I need a restrictor within the line,
or
> will the 1/4 inch line not impede oil to the remainder of the engine?
>
>
> Thanks,
>
> Corky@zaks.com
///
/// buick-rover-v8@autox.team.net mailing list
///
|