That's the second time this bellhousing has been advertised. The first time
the seller had a $100
minimum bid. It didn't sell. I offered him $25 after the auction. He refused.
Then I called Dan Lagrue. Good thing I didn't buy. The adapter Dan sells
makes the housing so long
the GM T-5 won't fit. However the Ford T-5 will. This is because the Ford
T-5 has a longer input
shaft.
http://cgi6.ebay.com/ebaymotors/aw-cgi/eBayISAPI.dll?ViewBids&item=490227158
Larry Hoy
>-----Original Message-----
>From: owner-buick-rover-v8@autox.team.net
>[mailto:owner-buick-rover-v8@autox.team.net]On Behalf Of lmg@gomog.com
>Sent: Tuesday, November 07, 2000 11:31 PM
>Cc: buick-rover-v8@autox.team.net
>Subject: Buick 215 Bellhousing
>
>
>Hi,
>
>If anyone is interested, I browsed by this on Ebay
>
>FACTORY MANUAL 3SPD BELLHOUSING. THIS CAN BE USED WITH 4 OR 5 SPD.BY
>USING AN
>ALUMINUM 3/8" ADAPTER PLATE MADE FROM TEMPLATE I HAVE TRACED FROM A 4SPD
>BELLHOUSING.and will give the correct spacing for gm muncie camaro or
>trans am transmission. In great condition no crack. Buyer pays fixed
>freight of $15.00
>
>bidding was up to 49.99
>
>Lorne
|