Yes, Dan is selling one, I bought the steel one he used as a pattern, & yes,
you can modify a Dual path, done it.
Easier to just buy the fiberglass, unless you happen to have a Dual path
sitting around. The DP is cool in that it has louvers on the sides.
Jim Stuart
Allen Wulf wrote:
> James,
>
> Dan LaGrue is selling a fiberglass pan for I think $25.00. He had a display
>model at the 3rd annual V8 meet in Champaign, Ill. I've also heard of
>modifying a bottom cover off of a Buick Dual path.
>
> Al Wulf
>
> >>> "Larry Hoy" <larryhoy@prodigy.net> 10/25 3:45 PM >>>
> James, I have one. You can take a look at it and see what
> you want to do. Dan LaGrue (sp) at D & D fabrications might
> be able to help you too. 810.789.2491
>
> Larry Hoy
>
> > -----Original Message-----
> > From: owner-mgb-v8@autox.team.net
> > [mailto:owner-mgb-v8@autox.team.net]On
> > Behalf Of James Nazarian Jr
> > Sent: Monday, October 25, 1999 3:33 PM
> > To: mgb-v8@autox.team.net
> > Cc: buick-rover-v8@autox.team.net
> > Subject: 63 buick bellhousing
> >
> >
> > With all the talk about the bellhousings lately,
> > I am wondering if anyone
> > has the inspection cover that belongs on the
> > bottom of the bell. I have a
> > 63 Buick with original 4-sp T-10 and bell. I
> > have been told that it is of
> > no structural importance, so any measurements on
> > shape etc to fabricate
> > one would be helpful as well. TIA
> >
> > James Nazarian
> > '71 B roadster
> > '74 BGT with no sills
> > '63 Buick 215 eyeing another rolling chassis
> >
|