buick-rover-v8
[Top] [All Lists]

Re: Transmission

To: Jon <jona@earthworld.com>
Subject: Re: Transmission
From: Jim Stuart <jimbb88@erols.com>
Date: Mon, 02 Nov 1998 18:25:27 -0500
Even simpler is to use the S-10 shifter on the stock Camero T-5 & insert
a wedge between the tranny & the rear trans crossmember. D & D made one
for me from 2 pieces of angle. I used the 1-stud GM rubber mount & the
stock B crossmember with the ears cut off in the stock location. The
engine is mounted with A/C mounts & the shifter is cut off & bent to
come out in the original location.

Jim


<Prev in Thread] Current Thread [Next in Thread>