"From: Gregory72@aol.com
"
"
"The 340\350 rod length is 6.384" center to center. Rod length on the 300 is
"5.96". Pin on the Buick 340 is the same as the 350\300. I don't know if the
"350 piston will work in the 300 block, although I DO know that Silvolite shows
"the same part number for the 300 and 340 piston. Apparently, they are the
"same.
another data point: the 225 v6 became 231 by substituting 350 slugs
for the 300 ones.
Andrew Hay there is nothing more fulfilling
internet rambler than doing a good deed in secret
adh@an.bradford.ma.us and then being discovered
|