--===============2135451101==
Content-Type: text/plain; charset="windows-1250"
Content-Transfer-Encoding: 7bit
I had a neighbor who re-built '57 chevys, at about one per year, they have
stainless steel trim. He would work the scratches out with fine sandpaper,
then hit it with the buffing wheel with some jeweler's rouge. Looks like
now!
BillB
TR3 TS/30766-LO
"A bad day in your TR is better than a good day at Home Depot!"
-----Original Message-----
From: british-cars-bounces@autox.team.net
[mailto:british-cars-bounces@autox.team.net] On Behalf Of Charlie & Ressie
O'Connors
Sent: Monday, May 28, 2007 12:46 PM
To: british-cars@autox.team.net
Subject: [British-cars] Refinishing Brushed Aluminum Trim
I have some trim pieces that are in good shape - other than deep scratches
and oxidation. Anyone have any suggestions on making these pieces look like
new. I would rather use the original pieces rather than replace them with
after market trim.
Thanks,
Charlie O'Connors
_______________________________________________
British-cars mailing list
British-cars@autox.team.net
http://autox.team.net/mailman/listinfo/british-cars
No virus found in this incoming message.
Version: 7.5.472 / Virus Database: 269.8.1/822 - Release Date: 5/28/2007
11:40 AM
Version: 7.5.472 / Virus Database: 269.8.1/822 - Release Date: 5/28/2007
11:40 AM
--===============2135451101==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
British-cars mailing list
British-cars@autox.team.net
http://autox.team.net/mailman/listinfo/british-cars
--===============2135451101==--
|