> Hope this can help someone. My clutch pedal seemed to pop
> out the last little bit as I took my foot off it. It turned
> out that the pin connecting the pedal to the actuating rod had
> elongated the hole in the pedal.
> You have to take out the pedal box to get the pedal off.
> Next either weld the hole shut and drill a new hole, or get another
> pedal.
> It is wortha look, mine ws close to being worn through
> before I could feel via my foot that something wasn't quite
> right
There was a discussion on this very subject a couple of years ago.
Make sure the clevis pin you use is made of a softer metal than the
pedal arm. Clevis pins are cheap and easy to replace. Going through
what you describe above is a pain in the ass.
Roland
|