On Tue, 29 Nov 1994, Graham Glen wrote:
> Snowdrop the Morris Minor has got a broken cranshaft pulley. I've got a
> new pulley and a new timing chain & gaskets (after reading about the
> how easy that was), but now the remains of the pulley are refusing to
> budge off of the cranshaft. There's nothing holding it on except a
> woodruff key. I've tried a reasonable amount of heat with a hot air gun,
A hot air gun probably won't do much; a propane or acetylene torch might.
But since it is broken anyway, why not drill a series of holes along the
diameter, and break it in half with a hammer and cold chisel?
Ray "Don't lose your temper, get a bigger hammer" Gibbons
|