On Wed, 28 Sep 1994, Chris Kantarjiev wrote:
> <snip, snip>
> I decided to install the temp probe "Italian style". Kenlowe owners
> always complain about not being able to get the temp set right; the fan
> runs too much
>or not at all. Both of our Italian cars have the temp probe at the output of
>the
>radiator, near the bottom hose, rather than at the input. This seems to make a
>lot more sense, because when you need to turn the fan on is when the radiator
>isn't cooling off the water! I set the controller to come on when the exit temp
Chris, your logic on this seems correct. I too, am somewhat
disappointed with my fan temp switch. I will try your fix and see if my
car maintains a more even temperature range.
Thanks for the tip!
Greg Meboe meboe@wsuaix.csc.wsu.edu
|