Earlier I asked about the orientation of the
two-position dash switches used on Spridgets from
post-Bugeye up to whenever they went to rocker
switches. I included the helpful drawing below to
assist in explaining my question, but I erred in my
indication of what is "ON" and "OFF". In fact, I now
realize that the position of On & Off has no
significance to my question, as the switches on or
off states are absolute and thus independent of how
they are oriented in the dash. So I restate my
question;
Which way are the two-position toggle switches on
post Bugeye Spridgets supposed to be oriented ?
(Note: the ascii dwg is accurate in the positions of
the toggle; one position is completely horizontal while
the other is ~ 45 degrees to the horizontal)
> ----(
> \
> or \
> ( (
> /
> / ---(
Hope this isn't too confusing - and thanks to the
people that have already replied, although the split on
answers was 50/50 so far ...... :-|
daren
|