>Actually, Roger, the assembly is welded together on the Midget (at least on
>all the backing plates I have seen). You can get the little rectangular
>pistons out OK, but the screw itself is in for the duration, being held
>captive by the welded part. Maybe Abingdon was worried about vibration
>loosening the bolts?
The Moke's "piston" tubes are welded too, but the adjustment screw/bolt is
easily removed through the back-plate (ie. towards the inside of the car).
It can't be removed through the front. Are you sure you can't get it out?
+----------------------------------------------------------------------------+
| John Taylor [The Banshee] Victoria University of Technology |
| s883351@minyos.xx.rmit.oz.au (Royal Melbourne Institute of Technology) |
| MOKING IS A HEALTH HAZARD. Melbourne, Victoria, AUSTRALIA |
+----------------------------------------------------------------------------+
|