In California I would talk to Jan Voboril. The last phone number I had was
310 455 1026. Jan has driven his 1016 Lancia across the country and back
and does the best elderly engine work on the West coast.
Bill Alexander
In a message dated 10/20/2009 3:19:41 P.M. Central Daylight Time,
mikey@b2systems.com writes:
OK, now we are on the correct coast, please reply to the list so I know
also. I had the address of someone in San Diego who has done pre-war
Singer motors before but that was about 10 years ago and not even sure
he is still around, trying to get his name/number back, its on a very
old IPAQ handheld that is not working right now :( He was quite elderly
then, I have to assume he is not working anymore as he would be in his
90s now. Too bad too because he had made some jigs for the Singer
motor.
But San Fran is close enough, if there is someone up there I can take
my motor up there.
mike
On Tue, 2009-10-20 at 10:35 -0700, Gundry, Kenneth wrote:
> While we're on the subject, so to speak, can anyone recommend a firm to
do
> Babbitt bearings in the San Francisco Bay Area? I have no real reason to
> suspect problems at present, but I am a bit puzzled that oil pressure is
not
> maintained at low revs. when the oil gets hot, and one explanation would
be
> that one or more bearings are leaking oil.
>
> If the bearings were converted
> to shells (if appropriate sizes were available), would bearing life be
greater
> or less?
>
> Ken G, 1925 Rover 16/50 Touring Car (San Francisco, well, Walnut
> Creek now)
British-cars-pre-war@autox.team.net
http://autox.team.net/mailman/listinfo/british-cars-pre-war
You are subscribed as bill5600@aol.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
British-cars-pre-war@autox.team.net
http://autox.team.net/mailman/listinfo/british-cars-pre-war
|