4.5" backspacing is about right. The other thing to make sure is that the
center bore is large enough. Since the rims are lug-centric, you should make
sure you find some rims that are set up to handle the lugs & nuts as well.
I'm running some Black Rock Series 909 rims right now. The only problem with
those is that the stock studs that are part of the rotors aren't quite long
enough for something that thick. So you have to make sure that aftermarket
wheels are thin enough as well.
--Chris
> On Apr 26, 2016, at 2:57 PM, diraxel@hush.com wrote:
>
> Hi,
>
> Could somebody confirm the offset on the stock rims?
> Is it 4.5" backspacing, 1" positive offset?
> (while it's 15" * 7" and 5 on 4.5" for the bolt pattern)
> any help appreciated
>
> Eric
> _______________________________________________
> Bricklin@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/bricklin/blizzard@0xdeadbeef.com
_______________________________________________
Bricklin@autox.team.net
Archive: http://www.team.net/archive
|