If it has come loose from the track it can be fixed easy by removing the inner
door panel. I suggest you remove tehpanael. slide the lower window channel out
of the rollers and take it out, you will have to loosen the nut that holds the
wheel that goes into the front channel. clean the channel once it is out, I
suggest welding 2 clips on the bottom to hold the glass incase the bond breaks
again, just 2 simple little angles will do, then rebond the glass to the
channel with windshield urethane, roll it up and let it cure. If you do not
choose to weld the clips on to hold the glass you will need to remove the
glass as well to bond it and let it cure then snake it all back in from the
top
On 2/24/2012 8:52:21 AM, Smoky & Connie Panepinto (panepintos@verizon.net)
wrote:
> Hey gang,
>
>
>
> I have a
> '75; it has not had any alterations to the side (door) window
> mechanisms. The passenger window has come loose from the regulator
channel.
> I can lift it up and down, and the window crank seems to work. Has anyone
> been able to re-attach a window without removing the door skin?
>
>
>
> I recall a couple of old Brickline articles on door window repairs, but the
> website is not searchable, and I seem to have lost any old Bricklines that
> might have dealt with it...
>
>
>
> Any suggestions/etc. would be appreciated!
>
>
>
> Thanks, and I'm
> looking forward to the upcoming summer/car season!
>
> Smoky Panepinto
>
>
>
> Smoky Panepinto,
>
> Perkiomenville, PA
>
>
>
> Original Owner '75 Bricklin
>
> Suntan; VIN 1302
>
>
>
> '63 Lincoln
> Continental Conv't
>
> Black/Maroon/White
>
> Appears in TRANSFORMERS 3
>
> White House scene, 2011
> _______________________________________________
> Bricklin@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.n
_______________________________________________
Bricklin@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|