Here is a copy of the e-mail I sent in November about body panels:
I have used 3 M Epoxy #2216 B/A for years - never had a failure in a
bond even when not completely clean metal. My uncle worked for 3M for
40 years and I asked him about what to use. He had their tech
department answer my questions and this is what they recommended. When
my uncle retired from 3M a couple of years ago, I asked if he could get
me a deal on some. He did. I would be willing to send a kit to whom
ever wants one, if they pay for the shipping. The kit is 2 oz of part A
and 1.3 oz of part B with instructions - mix in a 3:2 ratio. Very
simple, easy cleanup. I love the stuff. Caution: do not use on your
kids' lips, no matter how much you want to....not in the instructions
but a condition of sale.
I regret to say, I sent out all of the extra kits I had. I would
recommend calling 3M or going on their web-site for a dealer in your
area. I don't know how much the stuff would cost. It works well.
Amo #1207
cutright@eoni.com wrote:
> Hi Guys, A while back I remember reading about some recommendations
> for gluing or reattaching body panels on a Bricklin. Could you guys
> please refresh or rehash my memory. Thank you. Merv Cutright #1349,
> #2009, 68 Mustang convertible
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Bricklin@autox.team.net
> http://autox.team.net/mailman/listinfo/bricklin
>
> You are subscribed as paul-amo@comcast.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Bricklin@autox.team.net
http://autox.team.net/mailman/listinfo/bricklin
http://www.team.net/archive
|