Larry
This is what was circulated awhile ago.
From: owner-bricklin@autox.team.net
[mailto:owner-bricklin@autox.team.net] On Behalf Of Seth
Sent: Thursday, June 05, 2008 8:09 PM
To: John T. Blair
Cc: Bricklin@autox.team.net
Subject: Re: front end alignment
I forget where I got mine... They're close, but not the same:
1975 Bricklin Alignment Spec
Toe: 0.125 deg/side (; 1/16" /side)
Camber: -0.5 deg
Caster: +2.5 deg
John T. Blair wrote:
> At 07:53 AM 6/5/2008 -0400, Kevin Rodgers wrote:
>
>> Does anyone have the front end alignment spec. handy? My car is in
the
>> shop and they just called looking for the specs so they can manually
>> dial them in.
>>
>
> Kevin,
>
> Here's what I have:
>
>
> Alignment
> Caster +3 deg
> Camber 0 deg
> Toe in +1/8" (.26 deg or +.125 each side)
>
> John
-----Original Message-----
From: bricklin-bounces@autox.team.net
[mailto:bricklin-bounces@autox.team.net] On Behalf Of Larry Ankeny
Sent: Friday, October 09, 2009 2:46 AM
To: Larry Ankeny
Cc: bl
Subject: [Bricklin] front end alignment specs
I wrote it down somewhere, but I can't find it now.
What are the alignment settings for the 75
caster?
camber?
toe in or out?
thanks all
Larry in LV
#2046
_______________________________________________
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Bricklin@autox.team.net
http://autox.team.net/mailman/listinfo/bricklin
http://www.team.net/archive
|