I'm still trying to track down the door air leak on ol' 1343. I put a
check valve in the line to the compressor so that's not it. None of the
fittings are leaking. The doors stay up even after the pressure bleeds down so
it's
not the solenoids.
Thought it might be the pressure gauge but I put soap all over it and
couldn't detect any leaks. So that leaves a leak in the regulator, water
trap,
or the line to the tank.
Any idea how to see if it's the regulator? It's a rather slow leak as it
takes at least 6 to 8 hours for the pressure to drop to zero.
I guess 7 years with no leaks is a pretty good run.
Marvin
#1343
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Bricklin@autox.team.net
http://autox.team.net/mailman/listinfo/bricklin
http://www.team.net/archive
|