At 04:32 PM 3/8/2009, you wrote:
>I've finished sandblasting the frame on my car around the engine
area . Can i
>put the por 15 directly over the clean sand blasted area or do i
really have to
>use their metal ready product . I did not purchase any will have
to wait a week
>or so if i order it in . Will the por 15 stay on without it.
You can put the POR right over the bare metal. It likes sandblasted
and slightly
rusted metal.
As to their metal conditioner, I've never used it and never (well almost never)
had any problem with POR. The only time I did, was on a freshly formed piece
of new metal. I'd sanded but not blasted it and hadn't gotten all
the oils out ot
the metal. After the POR dried it peeled right off. After I
sandblasted it, every
thing was fine.
John
John T. Blair WA4OHZ email: jblair1948@cox.net
Va. Beach, Va
Phone: (757) 495-8229
48 TR1800 48 #4 Midget 65 Morgan 4/4 Series V (B1106)
75 Bricklin SV1 (#0887) 77 Spitfire 71 Saab Sonett III
65 Rambler Classic
Morgan: www.team.net/www/morgan
Bricklin: www.bricklin.org
If you can read this - Thank a teacher!
If you are reading it in English - Thank a Vet!!
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Bricklin@autox.team.net
http://autox.team.net/mailman/listinfo/bricklin
http://www.team.net/archive
|