make sure you check the back of the intake gasket, many leaks start there
and are confused with rear main leaks, The intake is much easier to fix as
well, check to make sure it is clean and dry back there before you start
down a path the may not need to be traveled. I have not done it on an AMC
based car but It appears impossible to do without engine removal and a ford
powered brick. I'm order to get the engine high enough to remove the pan you
will have to remove the transmission, you are 3/4 of the way out then....
On 12/19/06 2:13:43 AM, Greg Schroeder (gschroeder@comcast.net) wrote:
> I was hoping to clean up the continual puddle of oil that is under my car,
> by
> tackling the rear bearing seal and oil pan gasket. I put the car up on
> the
> ramps and
|