I don't know about a rust preventative foam, but I bought an undercoating
sprayer from JC Whitney and fabricated a longer "wand" for it out of copper
tubing. I hooked that up to my compressor and was able to get it in pretty
much everywhere so I could spray the POR-15. I did have to drill a couple
of holes (1/2") to get access to some areas though. I used a lot of POR-15
as I was shooting in the blind and wanted to make sure I got all the
surfaces well coated.
Alan Coleman
#246 Original Owner
>From: "Greg Schroeder" <gschroeder@comcast.net>
>>Subject: Rust Preventive Foam?
>Date: Tue, 2 May 2006 16:18:36 -0500
>
>Is anyone aware of a product that can be used to prevent rust that may work
>as
>a foam and then dissolves similar to POR-15? I have a few areas that I
>would
>like to treat for rust that I cannot get to easily. I would prefer to not
>have
>to go through major work to disassemble to get to the area.
>
>Greg 0036
|