Rick,
Thanks for the info about the paint. I'm trying to figure a way to mask the
Bricklin and the emissions stickers on the filter housing while I paint it.
While the Bricklin sticker is in good conditon still, the emissions sticker
has faded. I would like to preserve them both though.
Alan Coleman
#246 original owner
>From: "High Tech Coatings" <rick@hightechcoatings.com>
>Reply-To: "High Tech Coatings" <rick@hightechcoatings.com>
>To: "bl" <bricklin@autox.team.net>
>Subject: Re: Paint for air filter housing
>Date: Sat, 25 Mar 2006 04:43:01 -0500
>
>The paint does not need to be high temperature but it will probably be
>easier to find the correct colour in high temp engine enamel if you have a
>75, 74's are easy because they are just black. since you have a 74 make
>sure
>you take care of the decal as they are becoming hard to find, the 75's had
>no air cleaner decal
>Rick R
>
>
>On 3/24/06 6:26:02 PM, Alan Coleman (colemaal@hotmail.com) wrote:
> > Just want to find out what kind of paint people have been using when
> >
> > repainting the air filter housing. My real concern is whether or not I
> > need
> >
> > to use a high temp
|