Mine are grounded at the regulator bolt. Over the years this hole may have
become enlarged so a previous owner may have installed a different sized
bolt. The 2 easy fixes are cut a slot in the ring and expand it to fit the
new bolt OR use the proper sized bolt to hold on the regulator and use a
"backup" nut inside the wheel well.
Rick R
see you in Kitchner
> Can I trouble someone to go look at were the windshield washer motor is
> grounded at. I thought it was on the voltage regulator or horn relay
> mounting bolt but they are both 1/4 inch on my car and the lug for the
> washer motor ground is smaller than that.
>
>
> Thanks
>
> Kevin Rodgers
> Vin 2824
|