Greg,
Your car could be different, but in a "typical" air door setup, only three
are used. If you have Brickline vol. 25 nbr. 2 July 2000, there is an article
by Marvin May with a schematic diagram that might help. Let me know if you
don't have that issue.
George Curley
In a message dated 12/22/2004 11:56:42 AM Eastern Standard Time,
gschroeder@comcast.net writes:
> Does anyone have information on the pin outs for the door switch? In the
> process of replacing my carpet I found that there are six connectors and
> only three connected on the door switches on the outside and in the console.
> Currently mine only has the bottom row of pins connected. I believe the
> others may control the solenoid, but I am not sure.
>
> Currently on mine 4, 5 and 6 have a connection.
>
> 1 2 3
>
> 4 5 6
>
> I hope this will help me resolve the non working door solenoid problems on
> both doors.
>
> Greg
|