Don't know the part # but there is a C clip on the shaft between the bracket
and the switch. The switch is similar to all for switches the only
difference is the length of the wires, I would suggest a mid 70's cougar
with a 302 or 351w and a floor shift. These cars also used an FMX
transmission. mustangs typically used a C4 so the switch may be different or
may be the same.
I believe the AMC switches were different (dodge)
Rick
> Has anyone replaced the neutral safety switch on a '75? Mine has FoMoCo
cast
> into the housing so it is a Ford part, but I don't see a part number on
it.
> Anyone have a part number or interchange information? The shaft of the
switch
> is welded to a backing plate. Do I need to cut the welds or is there some
> sort of retainer on the shaft that can be released?
>
> Scott Isensee
|