bricklin
[Top] [All Lists]

Re: rear fenders

To: "Kaiser" <kaiser@ameritech.net>
Subject: Re: rear fenders
From: "John T. Blair" <jblair@exis.net>
Date: Thu, 06 Mar 2003 19:16:44 -0500
At 05:12 PM 3/6/03 -0500, Kaiser wrote:

>Is there anyway to take off the rear fenders without taking the whole body
>off?

Ken,

Yes, but it's not easy.  Do you want to salvage a fender?  That will be hard
to do, but not impossible.  You will have to cut the rear quarter panel at
the rool seam line, and try and loosen the glue joint at the rear panel.  The
fender goes behind the rear panel.  You will also have to break the glue joint
along the entire trunk deck area.  You'll have to drill out the 3 or 4 pop 
rivets on the door jam and the ones on the lower valance.  Remove the lower
valance, and then try and break the glue joint along the B pillar.  When
that is done, you should be able to remove the quarter panel.

John
 

John T. Blair  WA4OHZ          email:  jblair@exis.net
Va. Beach, Va                  Phone:  (757) 495-8229

          48 TR1800    48 #4 Midget    65 Morgan 4/4 Series V
     75 Bricklin SV1 (#0887)    77 Spitfire    71 Saab Sonett III
                       65 Rambler Classic

Morgan:    www.team.net/www/morgan
Bricklin:  www.bricklin.org

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/bricklin


<Prev in Thread] Current Thread [Next in Thread>