re:manifold

["jlwncw" <jlwncw@bellsouth.net>]

Congratulations on your manifold removal.They can be a pain.Now that you have
it off,when you install the new one(dual-plane edelbrock performer
recommended),use studs on the corners to insure it lines up right.Keep an eye
on the dipstick for water in the oil to be sure.Good time for a cam
swap,too.Good luck.
John
#1976

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/bricklin