Usually all it takes is a couple of sharp blows with a hammer or a
screwdriver to pry it up. if it is really stuck you can LIGHTLY wedge a
screwdriver / chisel under the front of the manifold and it will pop off if
you didn't miss any bolts.
Nothing you can spray on it will help. and they are usually stuck some what
but so bad so as a hammer or screwdriver won't break it loose.
Just to make sure, you have removed all 12 bolts from the intake right? the
2 in the middle on the passenger side look like they just hold on the choke
plate but they go through to the head.
Rick
> So a few questions:
>
> Is there anything I can spray on it to help break it loose?
>
> Is this common to have it stuck so well?
>
> are there any hidden bolts from under/side i may be destroying that i
could have missed (yes I'm sure I got all the ones on top)?
>
>
>
> Thanks again,
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/bricklin
|