Yep, it looks like it's on the edge of the full latch, so I'm guessing that I
need to move
the striker up a hair, not down.
Thanks,
Seth
#1544
*********** REPLY SEPARATOR ***********
On 6/27/2002 at 1:43 AM Mitwelt wrote:
>Again, you may want to make sure that they are actually latching twice.
>The
>second latch movement pulls the door in slightly. You can do that my
>letting the door drop slowly by hand and then pushing closed very slowly.
>You should here TWO clicks, not one.
>
>best of luck
>
>stephan#2821
>----- Original Message -----
>From: "Seth" <sbunin@comcast.net>
>To: <Bricklin@autox.team.net>
>Sent: Wednesday, June 26, 2002 7:33 PM
>Subject: door latches
>
>
>> Hi all, just trying to get in those last minute tweaks before the big
>meet. My doors open and close just fine, but when they are closed, if you
>push on them, they have about 1/8" of play in them (but they are latched).
>I'm guessing I want to move the striker down (and not mess with the latch
>on
>the door itself), but, since they do latch at the moment, I figured I'd
>check with you guys before I started tweaking.
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/bricklin
|