Hi Jason,
The Ford tube headers may fit, but with some modification. Specifically, is
they are similar to the ones I used (slightly later model), the driver's
side will have to be slightly reconfigured to clear the steering assem..
This means cutting and welding a couple of tubes. On the passenger side,
some grinding on the B and I "think" one tube has to be modified. The flow
gains are not great, and top end is not as good as long tri-ys, but idle is
smooth, and weight will be considerably reduced.
hope this helps,
stephan (the crotchety one) #2821
----- Original Message -----
From: "Jason p Mcclure" <jasonbrick@juno.com>
To: <bricklin@autox.team.net>
Sent: Saturday, February 02, 2002 2:10 AM
Subject: 75 Header
> Has anyone tried putting stock Mustang 5.0 headers on their Bricklin? My
> 1989 Mustang LX 5.0 Convertible came stock with some tube style header
> manifolds. They should bolt to 351W heads.
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/bricklin
|