The system is really so simple that I don't know if a diagram is really
needed. The best way to find a problem is with saopy water and looking to
see where the bubbles are coming from. Then just feplace that fitting or
tighten it. What causes a lot of problems is the lace of nipples at the
fittings. Remember, if the fitting doesn/t have a nipple that the tube
slides over and that the farrel tightens against, then you need to get the
lilttle brass ones that fit into the end of the tubing. If you have any
questions, just write. Kim
>Hi group,
> Does anybody know how or where I can get a copy of the routing for
>the Air doors on a 74' Bricklin. My doors work, but loose air very
>fast. I want to redo the entire air system with new lines and
>connector, then start looking at the cylinders and door switches. Any
>help on the where abouts of the plans would be greatly appreciated.
> Ed E.
>
>
|