If it's a return hose, you should be able to make a steel tube up for the
bend, then attach it with hoses/hose clamps.
----- Original Message -----
From: Greg Monfort <wingracer@email.msn.com>
To: Bricklin <bricklin@autox.team.net>
Sent: Tuesday, March 21, 2000 5:41 PM
Subject: Fw: 75 Power Steering question
> Mine has no markings and has a tight preformed almost
> 180deg bend at the pump end. It seems to me a longer
> straight piece could be looped around the high
> pressure hose and dipstick in a sweeping curve back
> to the pump.
>
> GM
> ----- Original Message -----
>
> > On the 75s (which use a different PS pump than
> the 74s) has anyone replaced
> > their resivor to pump hose? I'm looking for a part
> number or info on it.
> > It is relatively large in dia. Is it pre-bent, or
> have you been able to
> > bend some generic hose?
> >
> > John
>
>
>
>
|