Are you sure it's slid forward? The assembly should be tight against
the radiator bulkhead. If it's that loose, the whole assembly would
just be rattling around. The mounting studs project through the
bulkhead with the nuts accessed from under the hood above the vacuum
canisters.
GM
-----Original Message-----
>My driver's side head light mechanism is jamming and won't come up
when
>i turn the lights on. The black plastic surrounding the head light
is
>hitting the acrylic piece between the bumper and the hood. the
whole
>light mechanism has slid forward about 1/8 to 1/4 " forward. Are
there
>any adjusting bolts and how do I get to them.
>
> george iluk
>
|