>I have a schematic I generated so that I could rewire mine after it
>shorted way back when. I also have the instructions from TT's air
>door kit.
>
>When I made the drawing I didn't even bother to buzz out the OEM
>harness since I already knew it was s**t, nor did I necessarily
>match color coding since I ripped all the old wire out and started
>with new. It should allow you to tag your own wire ends though.
>
>I faxed the info to George, but I haven't heard back as to whether
>it was useful to him.
>
>GM
>-----Original Message-----
>
>
>>The other day someone posted a request for the door wiring
harness.
>I was out
>>working on my car today and thought I'd look at mine.
>>
>>Well all the wires are there, but most of the switches have been
>disconnected,
>>so I have the same problem to other person had. If anybody has a
>diag.
>>I'd appreciate a copy of it. If not a diag. then how about each
of
>the
>>switches and what wires go where.
>>
>>TIA
>>
>>John
>
>
>
|