Re: rust (again)

[GLCurley <GLCurley@aol.com>]

The POR-15 does go on the INSIDE.  In fact, that is the most important place
it needs to be.  I had Terry do one of my cars and he drills a little hole in
the frame and then swabs or shoots it (I forget which) INSIDE the frame.  I
don't have anything on the outside, but if I were doing it myself, or for a
car that was driven more, I would probably do the outside as well.  There is
article on the web site and in the Brickline about the subject.
George Curley