Are the mechanisms the same for all Bricklins? My '75 windows were
very hard to roll up/down, but debonding/rebonding while everything
was installed in the door, for proper alignment, solved the problem.
If they're not the same, maybe switching to later '75 mechanisms is
the solution. My door's metal shells are broken and only held
together by the skins, but the glass still moves freely.
GM
-----Original Message-----
>We went through the same problem last year (#301) and after
screwing
>around with it here in Baltimore (with minimal success), we finally
made
>the trip to Terry Tanner in Bedford, Va. The good news is he got
both
>windows in and working (apparently the regulator gets slightly bent
out of
>shape due to excess transverse forces), the bad news is a few weeks
later
|