bricklin
[Top] [All Lists]

Re: Holley

To: "Thomas Benvie" <tbenvie@bu.edu>, <bricklin@autox.team.net>
Subject: Re: Holley
From: "Greg Monfort" <wingracer@email.msn.com>
Date: Sat, 24 Jan 1998 11:12:05 -0500
I assume you're limiting your comments to 4 bbl's only. So you're saying the
AMC intakes are drilled to accept both square bore and spread bore bolt
patterns?

GM
-----Original Message-----


>The Holley bolt pattern is the same as the AMC intake, so any Holley carb
>would work, from aftermarket to a factory piece.  The only AMCs that used a
>Holley are the 65-66 Marlins and Ambassadors with the Rambler 327 engine.
>Anything higher than a 650cfm will be too much.  Most AMCers use a 550-600
>for mild street applications.
>
>Tom Benvie
>
>
>





<Prev in Thread] Current Thread [Next in Thread>
  • Holley, Thomas Benvie
    • Re: Holley, Greg Monfort <=