Good luck! If you had just ordered a little sooner! My Ford buddy says these
were just obsoleted back in April. He recommends hitting the parts houses.
They should have a reference book with pictures for comparing bends, total
length.
GM
-----Original Message-----
From: John T. Blair <jblair@exis.net>
To: Bricklin@autox.team.net <Bricklin@autox.team.net>
Date: Monday, October 13, 1997 5:26 PM
Subject: Smog Pump Hoses
>Hey Gang,
>
> I've been out working on 887 for a couple of hours over the last 3 days.
>Boy, that's a change from sitting here in front of the computer all night.
>
>Anyway, I'm trying to figure out how to put the smog stuff back on the eng.
>I think I've asked this question before, but has anybody found a source
>for the hose from the smog pump to that silver control valve, and the hose
>that goes from that valve to the manifold pipe on the back of the engine?
>
>After I cleaned up the hoses I could read the following information off of
>the hoses.
>
>Smog Pump to valve - shorter hose has the following markings on it:
> engraved in the hose - 88F75 ED D11134 x8
> painted on the hose - Motorcraft - D5CE 9F287-BA)
>
>Valve to mainfold pipe - Long hose has the following markings on it:
> engraved in the hose - EB 88F H75 D10124 Y150
> painted on the hose - D0ZE-9B466-A
>
>The data that is printed is some what blurred and I not sure of the numbers
>but that is what they look like.
>
>If anybody can find a supplier, please let me know.
>
>John
>
>
>John T. Blair WA4OHZ email: jblair@exis.net
>Va. Beach, Va Phone: (757) 495-8229
>
>48 TR1800 48 #4 Midget 65 Morgan 4/4 Series V
> 75 Bricklin SV1 77 Spitfire
>
>
>
|