Hey Jerry,
Maybe you should just by a Miata retractable hardtop roadster and solve
all your problems!
-----Original Message-----
From: bmcu-bounces@autox.team.net [mailto:bmcu-bounces@autox.team.net]
On Behalf Of Andrew Frink
Sent: Monday, January 04, 2010 8:01 PM
To: bmcu@autox.team.net
Cc: jerrynelson@mchsi.com
Subject: [Bmcu] Give your MGB the look of a modern roadster
This information came to me from the fellow below, and it looked like it
could be of interest to some club members, so I'm passing it on here.
Please contact Jerry at the info listed below if you wish more
information on his products.
Begin forwarded message:
> From: jerrynelson@mchsi.com
> Subject: give your MGB the look of a modern roadster
>
> Fellow MG enthusiast,
>
>
>
> Please see attached file for photos of my newly invented MGB Boot.
> The
following letter explains in detail........
>
> I would like to take this opportunity to introduce myself. My name is
> Jerry
Nelson and Ive been an Mgb owner for over 20 yrs. Having recently
retired Ive begun using my B for more over the road trips in addition
to around town everyday driver. In this capacity Ive been privy to
several irritants of the
car, and Im sure most of you will recognize them.
>
> 1. For safety sake I believe every daily driven car should have
a
third brake light , since this is something todays motorist and texter
is accustomed to.
>
> 2. Top down driving causes the ears to roar and make your wifes
hair
look like a punk rocker. Not a good way to impress her.
>
> 3. I cannot hear the St. Louis cardinals baseball games , or the
golden oldies on my radio at anything above idle.
>
> This is how those problems were addressed . A laminated boot cover has
> been
developed which serves as a platform for a third brake light. (Photo #1)
Shown here is a very simple light which is included with the purchase of
the cover.
I would encourage each owner to customize his or her unit with custom
lighting
to emphasize their own personality. You will notice the cover is
hinged to
allow the top to be stored or raised.(Photo#2) The cover has no effect
on the operation of the top ,and can be left in place permanently if
desired. The entire assembly can be removed from the car quickly, by
pulling the pins in the hinges.
>
> To help with the wind problem we have a detachable Lexan wind screen
> which
is mounted to the cover by means of two wing nuts.(Photo#3) Lexan is
advertised to be 250 times stronger than glass, and is used for airplane
canopies. There will be quite a noticeable difference in buffeting
when this
screen is in use. I think you will enjoy this. Notice also, this cutout,
which allows the driver to see directly down the trunk line for safety
purposes.
>
> Especially for those of you with Mk1 cars, which do not feature
> headrests,
we have these headrests (Photo#4) which are interchangeable with the
windscreen.(Photo#3) Simply remove wingnuts and replace screen with
headrests. Headrests may be padded according to your preference.
>
> Although not included, I have installed speaker units in my
> boot,(Photo#3)
and I enjoy them immensely. These are head high behind the occupants,
and allow one to hear the radio at road speed without being ticketed for
noise pollution. I would urge everyone to install speakers in their
boot. Notice that quick disconnects are used for the speaker and brake
light
feeds,(Photo#2) so the boot can be removed. The unit you see here has
been painted body color, but we have also tried some in satin black,
which looks nice with rubber bumpered cars. I look forward to seeing
different ideas from customers. Maybe upholstered, or contrasting
colors, club insignia, what have you? Should be interesting. There have
also been suggestions on decorating the wind screen, but be sure to
check with your local and state authorities before proceeding with this.
>
> In conclusion, this accessory has been developed, not only as a
> problem
solver, but as a way to encourage individualism, without severely
changing
your Mgb. Hope you have fun with it. As I am not very fast, I am
producing
these on a limited basis. Current prices are as follows.
>
> Boot cover with necessary mounting hardware..$480.00
>
> Windscreen.150.00
>
> Headrest.150.00
>
>
>
> I can be contacted at jerrynelson@mchsi.com
>
> Cell phone 217-370-7239
>
> Home phone 217-243-4662
>
> Thank you
>
> Jerry Nelson
_______________________________________________
Bmcu mailing list
Bmcu@autox.team.net
http://autox.team.net/mailman/listinfo/bmcu
_______________________________________________
Bmcu mailing list
Bmcu@autox.team.net
http://autox.team.net/mailman/listinfo/bmcu
|