Oops - sloppy on units. My TR6 CO levels are at 5 and 10% respectively,
not ppm. One could only hope for an engine that clean!
Neil
on 7/6/04 6:41 PM, Neil McCasland at neilmcc@worldnet.att.net wrote:
> Dear Brit car enthusiasts (madmen?)
>
> I've just been transferred to Hill AFB and drove up with a 76 TR6 from a
> land that didn't hold me to emissions testing. Any recommendations for
> shops and mechanics that have some good experience with the Zenith Stromberg
> carb set up and TR6's in particular? If you own a TR6, could anybody share
> with me what level of idle and fast CO you are acheiving? Based on how I
> could tune the carbs (including balancing the temperature comps) I was down
> to 4 to 5 ppm at 2500 (just out of limits) but at 8 ppm at idle which is x2
> limit. Passed HC easy, have a recent rebuild with tight rings and valves.
>
> Thanks!
>
> Neil McCasland
>
> /// bmcu@autox.team.net mailing list
> /// Send admin requests to majordomo@autox.team.net
> /// Send list postings to bmcu@autox.team.net
/// bmcu@autox.team.net mailing list
|