Go ahead, grin! :) :)
--Pat K
----------
>From: Rick Brown <rbrown7@pacbell.net>
>To: Pat Kelly <lollipop487@home.com>, "John F. Kelly Jr."
<76067.1750@compuserve.com>, ba-autox@autox.team.net, Jim Ochi
<jim_ochi@yahoo.com>
>Subject: RE: What happened?
>Date: Wed, Oct 24, 2001, 7:18 PM
>
>It's amazing what an extra 300 cubic inches will do. ;-)
>
>Rick Brown
>BP Corvette
>
>-----Original Message-----
>From: owner-ba-autox@autox.team.net
>[mailto:owner-ba-autox@autox.team.net]On Behalf Of Pat Kelly
>Sent: Tuesday, October 23, 2001 7:42 PM
>To: Rick Brown; John F. Kelly Jr.; ba-autox@autox.team.net; Jim Ochi
>Subject: Re: What happened?
>
>
>Heck, the fastest our 7 ever went was 82 mph downhill between Turns 2 & 3 at
>the old Laguna Seca. That was in fourth gear, flat out, no more revs, no
>power... There is a difference. :)
>--Pat K
>
>----------
>>From: Rick Brown <rbrown7@pacbell.net>
>>To: "John F. Kelly Jr." <76067.1750@compuserve.com>,
>ba-autox@autox.team.net, Jim Ochi <jim_ochi@yahoo.com>
>>Subject: RE: What happened?
>>Date: Tue, Oct 23, 2001, 7:21 PM
>>
>
>>We recorded a maximum of 85mph (in a BP car) at the AAS event at
>>Mather last weekend (5mph into our third gear). That is not an ureasonable
>>speed for a prepared car
>>at a Larry Park- inspired autox, IMO.
>>
>>Rick Brown
>>BP Corvette
>>
>>-----Original Message-----
>>From: owner-ba-autox@autox.team.net
>>[mailto:owner-ba-autox@autox.team.net]On Behalf Of John F. Kelly Jr.
>>Sent: Tuesday, October 23, 2001 9:37 AM
>>To: ba-autox@autox.team.net; Jim Ochi
>>Subject: Re: What happened?
>>
>>
>>-------------------- Begin Original Message --------------------
>>
>>Message text written by Jim Ochi
>>
>>"
>>At 06:47 PM 10/22/2001 -0700, Navid Kahangi wrote:
>>>p.s. In 3rd gear at Mather and Marina last weekend!!!
>>
>>Sunday at Mather, I had to shift to 3rd twice in each run!
>>
>>Jim"
>>-------------------- End Original Message --------------------
>>
>>Shifting to third, IMHO, puts the Solo II classes as the wrong set up.
>>Here's where road racing classes should be installed.
>>
>>--John Kelly
|