ba-autox
[Top] [All Lists]

RE: Trailer Hitches

To: "J. Ochi" <jochi@ricochet.net>,
Subject: RE: Trailer Hitches
From: "Navid Kahangi" <navid@interwoven.com>
Date: Tue, 16 Jan 2001 14:27:54 -0800
What's that Jim?  You have extra reinforcement plates in the spare tire
well?!?!?!  That should account for a full second improvement in your lap
time.  :)

--Navid

-----Original Message-----
From: owner-ba-autox@autox.team.net [mailto:owner-ba-autox@autox.team.net]On
Behalf Of J. Ochi
Sent: Tuesday, January 16, 2001 1:06 PM
To: Willis, Jane (410); ba-autox@autox.team.net
Subject: RE: Trailer Hitches

I'm not sure if Da'Lan makes two different models for the BMW 3-Series, or
it was the guys who installed my hitch, but the one I have on my M3 has
extra reinforcement plates in the spare tire well.  Pete Mottaz's 325
doesn't seem to have these plates, and he has some cracks under the
car.  Seems to me like you could get someone who's used to working on rusty
British cars to weld up the cracks and build some plates to fit in the tire
well for your hitch....

Jim

At 07:26 AM 1/16/2001 -0800, Willis, Jane (410) wrote:
>I have a D'lan on my BMW. It's light. 7 lbs. I can take the ball hitch on
>and off.  I had U-haul install it for me.  Unfortunately, I like to
"trailer
>race" and the result is cracking/tearing under the car.  Little 2 inch
slits
>going from both sides of the car.  Stress fractures I'm sure.  I've quit
>hauling the trailer...don't know what I'm going to do come race day.
>
>-Jane
>
>-----Original Message-----
>From: Smokerbros@aol.com [mailto:Smokerbros@aol.com]
>Sent: Monday, January 15, 2001 9:14 PM
>To: CMerritt@luminousnetworks.com; ba-autox@autox.team.net
>Subject: Re: Trailer Hitches
>
>
>Carl-
>
>I like hitches made by Da'Lan.  Installation is usually very
>straightforward.  The only problem was that they never had a "receiver
>style" hitch for my cars, so the hitch ball was always there...
>
>Charlie

<Prev in Thread] Current Thread [Next in Thread>