Howdy,
On Mon, 2 Aug 2004, Andy Hollis wrote:
> Most every aftermarket sway bar I've ever gotten has needed some
> modification to the bushings, if it came with urethane. They are almost
> always too tight. And lube is just a temporary fix. Solution is simple,
> pull out the urethane bushing, and take some material off the flat surface
> of the "D". Rubbing on concrete is the easy way. Put it back in, tighten
> up and see if you can move the bar without bind. Repeat as necessary.
>
> Or maybe your bar uses rubber and I'm all wet? :-)
I don't know what kinda bushings it has....
.... hangs head in shame and sheepishly makes an appointment with himself
to dissasemble the front of the car on Wednesday night....
:-)
Thanks for the ideas folks!
Mark
|