16 x 16 1/8 inch plate, painted black (16 x 16 gives very good yield from a
sheet of steel)
conduit for the uprights, 1/2 inch is plenty stiff
drill a hole in the center of the plate for a bolt to slide into conduit
We made 5/8 bolts by welding threaded rod to a washer. 5/8 carriage bolts
were too $
I plan on welding a 5/8 nut on the end of the conduit
store plates in a wooden box, stacked
store conduit standing up with one end in a box, the other
screw plate to end of conduit through hole in plate.
you can use take off tires for additional weight
Dan Morency
President
Cumberland Motor Club
www.CumberlandMotorClub.com
/// autox@autox.team.net mailing list
///
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe autox
///
/// or try http://www.team.net/cgi-bin/majorcool
///
|