I have a CSP 90 CRX... I'm running 1/16" toe-out in the front and 1/16"
toe-in in the rear. If you have a 1G integra then you might want to run the
same. I've thought about running zero toe-out/in for the front and 1/16"
toe-in for the rear...But, just haven't gotten around to trying it...
My mods:
Stock front sway bar
ST rear bar (centre hole on bar, top hole on bracket)
Koni top-adjustables
Intrax springs
ES bushings all around
_____________________________________________
-Kam
"Straights are for fast cars. Turns are for fast drivers."
'90 CRX
2K Maxima
|