William, if you are going to run it in stock class, you need to use the
stock dimension wheels. Plus or minus .25 inch offset is the only variation
you are allowed in stock....
Phil O.
----- Original Message -----
From: "William J. Petro" <petronix@optonline.net>
To: <autox@autox.team.net>
Sent: Saturday, August 26, 2000 7:17 PM
Subject: FS Mustang wheel size
> I'm looking for wheels to autox my 00 Mustang GT which will be run in FS.
> Anyone have words of wisdom whether I should go with the stock size of 16
x
> 7.5 or 17 x 8. I have the 17 x 8 for the street. I was thinking I might
be
> better off with the 16s for autox, for faster steering response, less
> rotational mass, etc.. I would be loosing out on the half inch width
> though. Anyone also know what size tire is best. I'll most likely be
> running Kumhos.
>
> Thanks in advance for any info.
> Bill P
>
>
|