So please clarify:
Are the Unorthodox Underdrive pulleys allowed in SP/ST(I think he was
asking...) since they're made of aluminum?
There's no mention about them being smaller just that they can be replaced with
materials of different type correct?
Tanks!
Ghsharp@aol.com on 07/06/2000 02:59:45 PM
Please respond to Ghsharp@aol.com@Internet
To: autox@autox.team.net@Internet
cc:
Subject: FasTrack item about underdrive pulleys
In a message dated 7/6/00 3:13:29 PM Eastern Daylight Time,
LiloACRguy@aol.com writes:
> It is, however, a mute point. There are no aftermarktet (underdrive)
> pulley's made that conform to the latest ruling: pulleys must be made out
> of the same material as stock.
>
> It was in the last fasttrack, item 4 I believe.
I've had several people ask me about this item. Here's how it reads:
"TECH BULLETIN
<snip>
4) Street Prepared: the allowance in Section 14.10.U for the use of alternate
pulleys does permit pulleys of different materials from those of the
original."
I don't see a "not" in between "does" and "permit"; therefore pulleys made of
alternate materials are perfectly legal for Street Prepared vehicles. This
was
in response to a member question. The words "same type" refer only to the
original belt/pulley configuration, i.e. V-belt or serpentine, not the
materials
used to make the pulley itself.
GH Sharp
*******************************************************************************
Note: The information contained in this message may be privileged and
confidential and protected from disclosure. If the reader of this message is
not the intended recipient, or an employee or agent responsible for delivering
this message to the intended recipient, you are hereby notified that any
dissemination, distribution or copying of this communication is strictly
prohibited. If you have received this communication in error, please notify us
immediately by replying to the message and deleting it from your computer.
Thank you. Ernst & Young LLP
*******************************************************************************
|