| To: | david borden <cobracrosser@jps.net> | 
|---|---|
| Subject: | Re: Question about Wheel (spring)Rates | 
| From: | Mark Sirota <msirota@isc.upenn.edu> | 
| Date: | Mon, 15 May 2000 14:05:25 -0400 | 
| david borden wrote: > The car is 50/50 wieght distrib, and is approx 2200lbs.(cobra > replica). I did a quick calculation and I believe it (the spring > rate at the ball joint) to be in the area of 150 lbs in the front. > 190 in the rear. Seems that the front is a bit soft. Most Formula Fords for Solo II run in the range of 50-100 lb/in wheel rate in front, and 75-150 lb/in wheel rates in the rear. These cars weigh 1100 pounds with driver (minimum), and have weight distributions of 40/60 typically. Hope that helps. Mark | 
| <Prev in Thread] | Current Thread | [Next in Thread> | 
|---|---|---|
| 
 | ||
| Previous by Date: | Re: Question about Wheel (spring)Rates, GSMnow | 
|---|---|
| Next by Date: | 14"x8", or 15"x8", 4x100mm wheels wanted, William Schenker | 
| Previous by Thread: | Re: Question about Wheel (spring)Rates, GSMnow | 
| Next by Thread: | Re: Karts, Junior, shifter etc., Jim Ourand | 
| Indexes: | [Date] [Thread] [Top] [All Lists] |